Rain Gauge Bracket
Rain Gauge Bracket for RGTB-4 and RGTB-6 tipping bucket rain gauges.
Rain Gauge Bracket for Hydrological Services RGTB-6 and RGTB-4.
Laser-cut aluminum is welded into a solid rain gauge bracket for mounting RGTB-6 and RGTB-4 on either a vertical flat surface or vertical pipe.
The mounting bracket includes leveling screws to ensure accurate and consistent performance of the gauge.
Access holes are included in the bracket so that tubes may be attached to the rain gauge drain ports. These ports allow for capturing of rain gauge discharge for measurement validation and redundancy.
Mounting bracket is shipped with leveling screws and band clamps.
Accessories and Options
Tipping Bucket Rain Gauge – Siphon Control
RGTB‑4TM is a chrome‑plated tipping bucket that collects rain in 0.01″ increments. With each tip, a signal is sent to attached equipment, such as data loggers or Dyacon control modules. RGTB‑4 uses a special siphon mechanism to ensure accurate measurements up to 19 in/hr (500 mm/hr).
Tipping Bucket Rain Gauge – Standard Funnel
RGTB‑6TM is a chrome-plated tipping bucket that collects rain in 0.01″ increments. With each tip, a signal is sent to attached equipment. RGTB‑6 is designed for high accuracy in low- to medium-rate precipitation environments. This tipping bucket rain gauge is best used where precipitation rates are typically below 4 in/hr (100 mm/hr).
- Solar Power
- Data Logging
- Modbus Cable Connection
- Embedded Cell Phone
- Email or FTP Data Logs
- Wind Speed and Direction
- Real-time Gust Detection
- Air Temperature
- Barometric Pressure
- Relative Humidity
- Soil Temperature
- Solar Sensor
- Professional Rain Gauge
- (Tripod not included.)