Infrared Thermometer

$575.00

NOT CURRENTLY IN PRODUCTION. CONTACT US FOR INQUIRY.

IRT‑201™ is an infrared thermometer with a Modbus RTU interface. The tight detection spot can measure objects are practical working distances of roadway surfaces, storage tanks, and foliage. When used with Dyacon weather stations, IRT-201 surface temperature is combined with on-site meteorological data.

Out of stock

SKU: IRT-201-005 Category: Tags: , , ,

Description

Video

Introduction

Coming Soon… or maybe not soon, but we will get to it.
See more videos.

Description

IRT‑201™

IRT-201* gives a non-contact surface temperature of the target. Simply point the thermometer at the object, such as a road surface, roof, foliage, or storage tank.

IRT-201 connects directly to Dyacon weather stations. By combining surface temperature measurements with meteorological data users gain a full image of contributing characteristics.

Of course, like other Dyacon weather station data, IRT-201 temperature is available on DyaconLive for real-time and charted historical information.

Since the wavelengths measured by IRT-201 are not absorbed in clear air, there is no theoretical distance limit.

The 20:1 measurement cone means that at 12 ft (3.7 m), the measurement circle will be only about 7.7 inches (20 cm). At 20 ft, the measurement circle is only 12.5 inches (32 cm).

Manuals & Software

Documents

IRT-201 Data Sheet

More information coming.

Key Features

Construction

IRT-201™ is a stainless steel instrument suspended in a PVC isolation enclosure.

The PVC enclosure can be configured as a closed, passively vented, or actively aspirated mounting system. Contact Dyacon for more information.

Measurement

Surface temperature and internal sensor temperature are both given digitally.

Measurement data is available through DyaconLive and on the LCD of Dyacon CM-1 weather station control module.

Installation

IRT-201 mounts to standard 1 inch Sch 40 pipe and standard structural pipe fitting. This provides mounting flexibility using low-cost parts.

Once IRT-201 is connected to Dyacon CM-1 weather station controller, the user can simply enable the instrument through the menu, and the measurements will be visible on the LCD and included in the log file and on DyaconLiveTM.

Data Connection

Power and data are supplied through a 4-wire Modbus RS‑485 connection to a host device. Drawing 8 mA average, IRT‑201™ is suitable for solar-powered instrumentation systems.

Mounting

IRT‑201 mounting system is compatible with standard 1″ structural pipe fittings and Sch 40 1” pipe, PVC, aluminum, or steel.

IRT-201 can be used with TPH-1TM Mounting kit, either it mounting on the same pipe, or with a separate mounting kit. IRT-201 isolates the sensor from sunlight and can be passively or actively vented (aspirated).

Accessories

IRT‑201 can be used with the Smart-FanTM aspiration kit for improved performance even in locations with high radiant heat sources or dusty environments. For dust protection, filtered air is vented through the mounting pipe and out the IRT-201 enclosure. Contact Dyacon for more information on mounting and venting options.

Specifications

MEASUREMENT SPECIFICATIONS*
Accuracy+/-1% of Reading or 1°C, whichever is greater
Repeatability+/-0.5% of reading or 0.5°C, whichever is greater
Emissivity0.2 to 1.0
Response Time125 ms (90% response)
Spectral Range8 to 14 µm
Measurement Spot20:1 + 0.5 inch (12.7 mm)
DistanceUnlimited in clean air

MECHANICAL SPECIFICATIONS
Size1.63 x 6.8 x 6.9 inch (17.3 x 17.5 cm) Non-vented version.
MaterialsStainless steel sensor UV-stabilized PVC isolation enclosure
Cable LengthApproximately 5 m (16.4 ft)
Cable Type4-conductor, 22 AWG, FEP jacket

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature0°C to 120°C
Liquid SealedIP67

ELECTRICAL SPECIFICATIONS
Power5 VDC to 24 VDC
Current8.1 mA average (When connected to Dyacon CM-1.)
CommunicationModbus RTU (RS-485), 19200 bps

*Dyacon IRT-201 is manufactured by Calex Electronics. All measurement specifications are provided by the manufacturer.

You may also like…

  • Temperature – Pressure – Humidity (Modbus) – 2 m Cable

    $534.00
  • Solar Sensor

    $265.00