Weather Station Display Software
Weather station instrument panel software for your computer. Connect to a Dyacon weather station using a cable or Dyacon’s short-range wireless kit. So simple that anyone can use it.
Dyacon Weather Station DisplayTM software is an easy-to-use weather station instrument display program for your personal computer.
This simple weather station console program connects to your Dyacon weather station using a cable connection to the Modbus port or with a short-range wireless link.
The Modbus RTU connection is capable of cable runs over 1000 ft when using low-cost CAT-5 or similar data cable. A simple USB-to-RS485 converter.
Dyacon Weather Station DisplayTM may be used in place of or in addition to the embedded cell phone. Whether a cable or wireless link is used, it provides redundancy and versatility for your weather station needs.
Buy it Once.Free Weather Station Display upgrades for all weather station users. As we grow the software, you receive the benefits.
- Easy to use and configure
- Connection status indicator
- Analog and digital readings
- High-contrast dials
- High and low readings
- Average, trend, and other values
- Low-cost alternative to cell phone costs
- Operates with wired or wireless link
- On-site aviation support
- Industrial safety
- Weather observer
- Public safety
- Event support
Analog: Current temperature and dew point.
Numeric: Temperature, dew point, daily low, and daily high temperature.
Units: Celsius or Fahrenheit
Analog: Current mean sea level and absolute barometric pressure.
Trend: Steady, rising, falling, rising fast, or rising slow.
Numeric: Current MSL and absolute, daily low, and daily high.
Units: mbar, mmHg, inHg, kPa
Analog: Current, 2 min avg, 10 min avg, and gust (red triangle)
Numeric: Current, 2 min avg, 10 min avg, and gust
Units: mph, m/s, km/h, knots
Analog: Current relative humidity
Numeric: Current relative humidity, daily low, and daily high
The units and serial port selection are easy to configure.
Accessories and Options
Weather Station Control Module and Datalogger
CM‑1TM Weather station control module integrates all weather station hardware into a single circuit board including datalogger, solar charge controller, and embedded cell phone. CM‑1 is an easy-to-use professional weather station controller used for all Dyacon weather stations.
USB to Modbus-RTU
USB to Modbus-RTU and SDI-12 Converter for use with Dyacon WSD and TPH sensors and Dyacon weather station controllers.