Showing all 10 results
Temperature / Pressure / Humidity – Modbus
TPH‑1TM is a digital output air sensor that measures air temperature, relative humidity, and barometric pressure. TPH‑1 uses the Modbus protocol to connect to computers, programmable logic controllers (PLCs), and some data loggers.
Wind Sensor – Modbus
WSD‑1TM combines wind speed and direction sensors into a rugged package. Digital sensor data are delivered using the Modbus protocol, which allows for long cable runs to computers, programmable logic controllers (PLCs), and some data loggers.
Accessories and Options
Tipping Bucket Rain Gauge – Standard Funnel
RGTB‑6TM is a chrome-plated tipping bucket that collects rain in 0.01″ increments. With each tip, a signal is sent to attached equipment. RGTB‑6 is designed for high accuracy in low- to medium-rate precipitation environments. This tipping bucket rain gauge is best used where precipitation rates are typically below 4 in/hr (100 mm/hr).
Tipping Bucket Rain Gauge – Siphon Control
RGTB‑4TM is a chrome‑plated tipping bucket that collects rain in 0.01″ increments. With each tip, a signal is sent to attached equipment, such as data loggers or Dyacon control modules. RGTB‑4 uses a special siphon mechanism to ensure accurate measurements up to 19 in/hr (500 mm/hr).
Soil Moisture Sensor
SMEC‑5TM is a soil moisture sensor for all soil types. It measures total volumetric water content for the soil or media.
PSP‑110TM provides an accurate measure of solar energy. It is used for solar power modeling, evapotranspiration calculations, and general weather observations.
Flat Surface Thermistor Probe
TSFS‑1TM is a flat surface temperature sensor with stainless steel probe body. It is used to measure surface temperature, such as for solar panels.
Stainless Steel Thermistor Probe
TSSP‑1TM is a stainless steel thermistor probe used to measure soil temperature, liquid temperature, or surface temperature. The sensing element is a swaged stainless steel shell.
Globe Temperature Sensor – Modbus
Globe Temperature Sensor, GT-1TM and GT-2TM are used with humidity and ambient air temperature sensors to calculate wet-bulb globe temperature (WBGT).
Lightning Detector – Modbus
LD‑1TM is a Modbus lightning detection sensor. LD‑1 uses the Modbus protocol to connect to computers, programmable logic controllers (PLCs), and some data loggers.